Crouse-Hinds Crouse-Hinds FlexStation™ EDSC218 1-Gang Factory Sealed Through-Feed Snap Switch Control Station With Snap Switch, (2) 3/4 in Hub, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
Crouse-Hinds Crouse-Hinds FlexStation™ EDSC218 1-Gang Factory Sealed Through-Feed Snap Switch Control Station With Snap Switch, (2) 3/4 in Hub, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
SKU: 5266
Manufacturer Part Number: EDSC218
Manufacturer Item Status: Discontinued
UPC: 782274765280
Brand: Crouse-Hinds
Manufacturers: Eaton
Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Dust ignitionproof, raintight
- To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
- In conjunction with magnetic starters or contactors for remote control of motors
- For manual starting of small AC/DC motors
- To provide manual starting and stopping and motor running protection (with heater)
- 3/4 in hub