Crouse-Hinds Crouse-Hinds FlexStation™ EDS225 2-Gang Dead End Factory Sealed Heavy Duty Pushbutton Control Station, 600 VAC, 3/7B/7C/7D/9E/9F/9G NEMA Rating
Crouse-Hinds Crouse-Hinds FlexStation™ EDS225 2-Gang Dead End Factory Sealed Heavy Duty Pushbutton Control Station, 600 VAC, 3/7B/7C/7D/9E/9F/9G NEMA Rating
SKU: 5203
Manufacturer Part Number: EDS225
Manufacturer Item Status: Discontinued
Country of Origin: Mexico
UPC: 782274763552
Brand: Crouse-Hinds
Manufacturers: Eaton
Features
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
- Explosionproof, dust ignitionproof, raintight
- 3/4 in hub
- Two circuit
- Fully assembled
- For use with EDS/EFS series control stations