Skip to main content

Wiremold® Wiremold® 8AT2PCRBZ Evolution™ Series Fire Classified Multi-Service Prewired Recessed Poke-Through Assembly With Flush Style Cover, 8 in Hole, 5 Gangs, Aluminum/Plastic/Steel

Selected Wiremold_8CT2BZTR_3.jpg
Wiremold_8CT2BZTR_3.jpg

Features

  • 5-Compartments for power, communications and/or A/V devices, all recessed 4 in below the floor level, providing maximum protection and device longevity
  • Compatible with most A/V manufacturers devices including their 1-gang, 2-gang and 3-gang decorator style design
  • Flush style cover for tile applications allows the Evolution™ series poke-through devices to be adjusted to the same level as the top surface of the floor covering
  • Tile cover is designed to be used in higher traffic applications, where a low profile is a must
  • Egress doors lock in position when slid open and automatically close around cables, reducing the egress opening to the smallest size possible
  • Step-on-it installation - quick, easy installation without the need for additional fasteners or a second installer
  • Pre-pour sleeve creates a cast in place core hole that allows the contractor to position poke-through units before concrete is poured
  • Eliminates the cost and labor of coring the opening
  • TopGuard™ protection - all Evolution™ series poke-through devices, like every Wiremold® poke-through device, meet and exceed UL scrub water exclusion requirements for tile, carpet and wood covered floors
  • Poke-through trim flanges are beveled so the slope is no greater than 1:2 ratio
  • Wide trim flange is designed to meet the ADA accessibility guidelines as it pertains to ADA standard 4.5 which addresses changes in floor and ground surface levels
  • Suitable for use in air handling spaces
  • Evolution™ series poke-through design includes all metal die cast aluminum cover assemblies
  • Provides greater durability while creating a more fluid, intuitive, opening and closing motion
  • Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services
  • Poke-through device installs into a 8 in to a 8-1/8 in dia hole
  • All five compartments are recessed 4 in below the floor surface level
  • Flush style cover is an aluminum cover that is designed to sit on top of finished floor surfaces

Description

Wiremold® Poke-Through Assembly, Fire Classified Multi-Service Prewired Recessed, Series: Evolution™ Series, 8 in, 5 Gangs, Receptacle Device, 16-1/4 in Length, 9-1/4 in Width, For Use With: Carpet, Tile and Wood, Die Cast Aluminum Cover, Aluminum/Plastic/Steel, Bronze, Powder Coated

Resources

Related Items

Recently Viewed Items