Skip to main content

Leviton® Leviton® OSSMD-MAW OSSMD 1-Pole Multi-Technology Wallbox Dual Relay Occupancy Sensor, 120/208/220/230/240/277 V AC, Passive Infrared/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, Wall Mounting

Selected Leviton_OSSMD_MAW.jpg
Leviton_OSSMD_MAW.jpg

Features

  • Provides automatic lighting control for two separate banks of fluorescent, incandescent or low voltage lighting from a single unit
  • The second relay is a manual-On only with a maximum 30 min time out for maximum energy savings to comply with CEC title 24
  • Fits in a standard single gang wallbox and replaces two single pole wall switches for fast and easy installation, neutral and ground connection required for OSSMD-MD, OSSMD-GD does not require a neutral for installation
  • Low profile design eliminates obtrusive scanning device look, elegant Decora® wallplates complement any interior for sleek aesthetics, uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
  • 180 deg field of view provides approximately 2400 sq-ft of coverage, suitable for a variety of commercial areas
  • Convenient pushbutton provide manual-On/Off light switching of each load at any time
  • Segmented fresnel lens provides optimum sensitivity and performance, designed with an extensive minor motion area where even slight body movements will be detected
  • Vandal-resistant PIR lens
  • Adjustable horizontal field of view (PIR) may be adjusted between 180 deg and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
  • Manual-On/auto-Off mode for installations where manual-On switching is required but auto-Off switching is still desired for CEC title 24 energy savings
  • To comply with CEC title 24, LED indicator light flashes when sensor detects motion to verify detection is active, green flashes for ultrasonic, red flashes for PIR
  • Time delay adjustment for delayed-off time settings of 30 s (for walking test), 10 min, 20 min and 30 min allows customized adjustments to maximize energy savings
  • Light sensor measures the ambient light in the room when it first detects motion and leaves the lights Off (hold-off) if there is enough light in the room or turns the lights connected to the first relay On if there is not enough light in the room
  • Self-adaptive technology eliminates callbacks for adjustments, time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode
  • Exclusive walk through feature provides increased energy savings by not leaving the lights on for an extended period after only momentary occupancy
  • Non-adaptive mode disables self-adjusting delayed-off time and walk through feature in applications where these feature are not desired
  • Vacancy confirmation, when the time out expires and the relay turns Off, a 30 s vacancy confirmation exists to turn the relays back on
  • False detection circuitry
  • U/S technology provides excellent minor motion sensitivity

Description

Leviton®, OSSMD-MAW, Dual Relay Occupancy Sensor, 1-Pole Multi-Technology Wallbox, Series: OSSMD, 120/208/220/230/240/277 V AC, 10 A, 800 W, 1200 VA, 2700 VA, 800 VA, 1/4 hp Power, Passive Infrared/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, 30 s/10/20/30 min Time Delay, Fluorescent/Incandescent/LED Lamp, 50/60 Hz, 40 kHz Response, Neutral/Ground Wire Connection, Manual-On/Manual-Off/Auto-Off Control Output, Wall Mounting, 32 to 104 deg F, White, 1.75 in W x 4.06 in H Dimensions

Resources

Related Items

Recently Viewed Items