Skip to main content

WattStopper® WattStopper® InteliSwitch® AS-100-I Low Voltage Automatic Control Switch, 24 V DC, 5 mA, 1 Pole, Ivory

Selected WattStopper_AS-100-B.jpg
WattStopper_AS-100-B.jpg

Features

  • AS-100 Automatic Control Switch operates as both a manual and automatic control device
  • Simple retrofit installation and operation, no neutral needed
  • Shutoff warning with optional audible beep during grace period
  • Pushbutton overrides the shutoff event
  • Multiway operation for 3- and 4-way switching
  • Settings are selected with the front pushbutton using configuration LEDs, faceplate does not need to be removed for setup
  • Self-adjusting zero crossing switching for consistent, reliable operation of high inrush loads
  • Five minute delay OFF time with user ability to cancel impending shut-OFF
  • Compatible with all electronic ballasts and motor loads
  • Microcontroller enhances reliability
  • Command OFF without delay OFF time
  • Pushbutton is used as actuator for easy switching operation
  • It has screw type terminals for convenient screw type terminals for wiring connection
  • Switch is mountable on to standard wall box
  • Power interruption signal resolution +/- 0.1 sec
  • No minimum load requirements
  • Manual control of lighting loads
  • 0 to 1300 W at 120 VAC ballast and tungsten or 0 to 3000 W at 277 VAC ballast load
  • 5-95% RH, non-condensing environmental conditions, 20 to 4 AWG stranded, momentary switch

Description

WattStopper® InteliSwitch® Automatic Control Switch, Low Voltage, Series: AS-100, 24 V DC, 5 mA, 60 Hz Frequency, 1 Pole, Automatic/Pushbutton Switch Control, Surface Mounting, 32 to 131 deg F, Plastic, Ivory, 1.75 in W x 1.81 in D x 2.69 in H Dimensions

Recently Viewed Items

Loading recently viewed products...
Loading product details...