Skip to main content

Siemens Siemens 87HUG6FA Class 87 Pump Control Panel, 110 to 240 VAC V Coil, NEMA 3/3R Enclosure

Selected Siemens_87HUG60A.jpg
Siemens_87HUG60A.jpg

Features

  • -22 to 149 deg F during storage
  • 3NO contacts for main contacts
  • 0NC contacts at contactor for auxiliary contacts, 1NO contacts at contactor for auxiliary contacts, 7 total auxiliary contacts maximum
  • 110 to 240 VAC at 60 Hz/0 to 0 VAC 50 Hz rating
  • 14 W holding power at AC minimum
  • 310 VAC apparent pick up power of magnet coil, 26 VAC apparent holding power of magnet coil
  • 0.85 to 1.1 VDC operating range factor control supply voltage rated value of magnet coil
  • 50% drop-out voltage of magnet coil related to the input voltage
  • Overload protection, phase failure detection, phase unbalance, ground fault detection, test function, external reset overload relay function
  • 25 to 100 A adjustable pick up value current of the current dependent overload release
  • 3 sec trip time at phase loss maximum
  • Protective coating on printed circuit board
  • 5 A at 600 VAC/1 A at 250 VDC operating current of auxiliary contacts of overload relay
  • Vertical surface mounting and installation
  • 10 kA at 600 VAC (class H or K)/100 kA at 600 VAC (class R or J) design of the fuse link for short circuit protection of the main circuit required
  • 0 hp at 200/208 VAC/0 hp at 220/230 VAC/50 hp at 460/480 VAC/50 hp at 575/600 VAC electrical ratings

Description

Siemens Pump Control Panel, Class 87, 600 V AC, 25 to 100 A, 50/60 Hz Frequency, 14 W Wattage, 50 hp Motor, 110 to 240 VAC Coil, 26 to 41 ms On/14 to 19 ms Off Timing, Automatic/Manual/Remote Reset, 3 ph, Box Lug/Screw Connection, SZ 3 Size, Solid-State Overload Relay, 10 A at 600 V AC A600, 5 A at 600 VDC P600 Auxiliary, HAND/OFF/AUTO Selector Switch Control, NEMA 3/3R Enclosure, 5000000 Cycles Operating Cycles, -4 to 104 deg F Operating, 41 in H x 24 in W x 8 in D Dimensions

Resources

Related Items

Recently Viewed Items