Skip to main content

Leviton® Leviton® ODS10-IDI 1-Pole Occupancy Sensor, 120/230/277 V AC, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, Wall Mounting

Selected Leviton_ODS10-IDI.jpg
Leviton_ODS10-IDI.jpg

Features

  • Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
  • Low profile design eliminates obtrusive scanning-device look
  • Convenient pushbutton provides manual ON/Off light switching at any time
  • Two dual element PIR sensors used to widen detection range
  • Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
  • Vandal-resistant PIR lens
  • Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
  • Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC title T24 energy savings
  • To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
  • Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
  • Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
  • Light sensor enables the load hold Off feature once level has been set
  • Vacancy confirmation when the time out expires and the lights turns Off, a 30 sec vacancy confirmation exists to turn the lights back ON
  • False detection circuitry
  • Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
  • 1-unit can be used for 120 to 277 VAC lighting
  • Compatible with both electronic and magnetic ballasts
  • Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
  • Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
  • No neutral design is optional for retrofit applications

Description

Leviton®, ODS10-IDI, Occupancy Sensor, 1-Pole, 120/230/277 V AC, 100/250 mW Power, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Time Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Auto Control Output, Wall Mounting, 0 to 50 deg C, Ivory, 1.75 in W x 1.85 in D x 46 in H Dimensions

Resources

Related Items

Recently Viewed Items